Nymphea
 
 

Check the up-to-date version of this page at www.saariaho.org/Nymphea-electronics.html

For general technical notes go to www.saariaho.org/Electronics-general-notes.html

For solutions to common problems go to www.saariaho.org/Electronics-common-solutions.html

General information

The electronics for this piece can be run with a Max patch including all effects.

Cues in the score must be triggered by one of the performers with a sustain pedal (or by another musician directly on the computer at the mixing desk).

In both rehearsal and performance the sound engineer/musician should read the score and adjust the relative levels of the instruments and electronics on the mixing desk, according to the given context (musical interpretation, equipment, acoustics of the performance space).

Downloads

latest standalone patch version does not require Max installation

alternative: mxf patch version requires Max installation

Technical requirements

  1. -Macintosh computer equipped with an external audio interface compatible with Max (cf: www.cycling74.com), e.g. Motu: www.motu.com, Digidesign: www.digidesign.com, RME: www.rme-audio.com

  2. -Sustain pedal (for Max triggering) connected to the computer through a MIDI keyboard, or through a MIDI interface and a voltage-to-MIDI converting device, e.g. MIDI Solutions’ Footswitch controller, see www.midisolutions.com

  3. -Microphones for two violins, viola, cello

  4. -Mixer & stereo diffusion (possibly return monitors for the musicians)

Performance notes

The amount of amplification required naturally depends on the performance space, but it should never cover the acoustic sound of the instruments.

The sound ideal is a clear and rich 'close’ sound. The microphones should be placed as close to the instruments as possible.
The general level should be rather loud, but not painfully so.